[Documentation] [TitleIndex] [WordIndex

myCobot

myCobot

myCobot is the world's smallest and lightest six-axis collaborative robot, jointly produced by Elephant Robotics and M5STACK. It is more than a productivity tool full of imaginations, can carry on the secondary development according to the demands of users to achieve personalized customization.

With a weight of 850g, a payload of 250g and an arm length of 350mm, myCobot is compact but powerful, can not only be matched with a variety of end effectors to adapt to different kinds of application scenarios also support the secondary development of multi-platform software to meet the needs of various scenarios such as scientific research and education, smart home, light industry and commercial applications.

For more information about hardware and software, please see https://www.elephantrobotics.com/en/mycobot-en/.

  Show EOL distros: 

Overview

1. Homepage

https://www.elephantrobotics.com/en/mycobot-en/

2. Source Package

https://github.com/elephantrobotics/mycobot_ros

Notes:

Make sure that Atom is flashed into the top Atom and Transponder or minirobot is flashed into the base Basic .The tool download address: https://github.com/elephantrobotics/myCobot/tree/main/Software

Supported ROS versions:

  • Ubuntu 16.04 / ROS Kinetic
  • Ubuntu 18.04 / ROS Melodic
  • Ubuntu 20.04 / ROS Noetic

Installation

1. Option 1: Docker

There are two ways to run this project. The first is by running the project in a container, and this requires installing docker (https://docs.docker.com/engine/install/ubuntu/) and installing docker-compose (https://docs.docker.com/compose/install/). The benefit of running in the container is that you can run the project in any version of Linux, as long as your kernel is new enough.

Once docker is installed, run the following command, and the project should show up.

without NVIDIA GPU:

docker-compose build ros && xhost +local:root && docker-compose up ros

with NVIDIA GPU

docker-compose build nvidia-ros && xhost +local:root && docker-compose up nvidia-ros

This command does three things: 1) docker-compose build ros

  • This builds the project in a container. That means nothing is installed on your host machine! The first time this runs, this command will take a long while. After running it once, caching will allow this command to run quickly.

2) xhost +local:root

  • This command gives X the ability to display GUI's from within the docker container

3) docker-compose up ros

  • This runs the image specified in the docker-compose.yml, which by default runs the command roslaunch mycobot_320 mycobot_320_slider.launch within the container.

2. Option 2: Local

2.1. 1.1 Pre-Requriements

For using this package, the [Python api](https://github.com/elephantrobotics/pymycobot.git) library should be installed first.

pip install pymycobot --user

2.2. 1.2 Package Download and Install

Install ros package in your src folder of your Catkin workspace.

$ cd ~/catkin_ws/src

$ git clone --depth 1 https://github.com/elephantrobotics/mycobot_ros.git

$ cd ~/catkin_ws

$ catkin_make

$ source ~/catkin_ws/devel/setup.bash

2.3. 1.3 Test Python API

cd ~/catkin_ws/src/mycobot_ros

python test.py

Tutorial

https://www.elephantrobotics.com/docs/myCobot-en/3-development/4-ros&moveit/

1. Slider Control

https://www.elephantrobotics.com/docs/myCobot-en/3-development/4-ros&moveit/3-controlAndFollow.html

2. Teleop with Keyboard

https://www.elephantrobotics.com/docs/myCobot-en/3-development/4-ros&moveit/4-keyboard_control.html

3. MoveIt

https://www.elephantrobotics.com/docs/myCobot-en/3-development/4-ros&moveit/5-moveit.html

Videos

Report a Bug

Please, check and open issues here: https://github.com/elephantrobotics/mycobot_ros/issues


2022-05-28 12:23