[Documentation] [TitleIndex] [WordIndex

An alternative way for building on ARM (gumstix overo/verdex)

I have been spending some effort on making ROS compiling for the gumstix and I'd like to share the experience. First of all, I have tried the approach listed above, and they are not my favourite but they provide a good basis.

The first thing I have done is installing ubuntu on the gumstix (a guide for that can be found on http://johnwoconnor.blogspot.com/2009/04/installing-ubuntu-on-gumstix-overo.html). This simplifies a lot the process of getting all the 3rd party libraries compiled (in particular boost, xmlrpc++, log4cxx, apr can then just be obtained using an apt-get call).

Once you have installed ubuntu on the gumstix, you could in theory install all the -dev packages and gcc/g++ and compile everything natively. Needless to say that it might be a little bit long given the performances of the gumstix. However, this is a working solution.

The second solution is to run a gumstix image using qemu and in particular qemu-system-arm (package qemu-kvm-extras in ubuntu 9.10). To this end, you first need to setup a disk image, format it, mount it, copy the file system created using the link above.

 #> qemu-img create overo-ros.img 2G
 #> mkfs.ext3 overo-ros.img
 #> mkdir overo-ros
 #> mount -o loop overo-ros.img overo-ros
 #> cd overo-ros
 #> sudo tar -zxvf /path/to/armel-rootfs-YYYYMMDDhhmm.tgz

At this point the file system can be umounted and launched with qemu (get the kernel by following the instruction at http://people.canonical.com/~ogra/arm/qemu/README)

 #> cd ..
 #> umount overo-ros
 #> sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.28-versatile -hda overo-ros.img -m 256M -append "root=/dev/sda" -net nic -net user

I have not tried booting the image while it is still mounted. I suspect it does not work so well.

Once qemu has started the image, one can easily apt-get arm packages and update the image to get all the -dev packages. It is also possible to install gcc and compile all ros in the virtual gumstix. However, this takes forever, even longer than on the real system.

However, getting qemu running is not a loss of time. Once all the -dev packets have been installed, the ubuntu image can be used to cross-compile. To this end, I first quit qemu, and remount overo-ros.

The following will assume you have a a cross compiler installed, for instance through buildroot or open-embedded (check the gumstix wiki). We can then use the -sysroot option of gcc to compile using the overo-ros directory as the root of the filesystem (where /usr/include and /usr/lib are looked for). However, at the time of this writing libtool is not able to pass a -sysroot option to gcc, so I write a set of scripts for gcc, g++ and cpp, respectively called gcc-sysroot, g++-sysroot, and cpp-sysroot. The scripts are as follows:

 #!/bin/bash
 if test -n "$ARM_SYSROOT"
 then
    SYSROOT=--sysroot=$ARM_SYSROOT
 fi
 exec ${0/-sysroot/} $SYSROOT $*

The same script can be used for all the executable as it find which binary to call based on how it was called.

Once the scripts are defined, I have a special gumstix compilation environment:

 export GUMSTIXTOP=$HOME/overo-oe/
 export OVEROROOT=$HOME/overobuntu/overo-ros
 export PKG_CONFIG_PATH=$OVEROROOT/usr/local/lib/pkgconfig:$OVEROROOT/usr/lib/pkgconfig

 export ARM_SYSROOT=$OVEROROOT
 export CROSSBIN=$GUMSTIXTOP/tmp/cross/armv7a/arm-angstrom-linux-gnueabi/bin
 export PATH=$CROSSBIN:$PATH
 export AR=$CROSSBIN/ar
 export CPP=$CROSSBIN/cpp-sysroot
 export CXX=$CROSSBIN/g++-sysroot
 export CC=$CROSSBIN/gcc-sysroot

Once this is sourced in the current shell, you can call rosmake normally, and everything should be able to compile. Obviously, rosdep install does not work (you have to restart the qemu thing and call apt-get from there, or at least that the easy solution I found). I have all the laser and image processing stack working in particular, even libdc1394 with the usb drivers for the pointgrey cameras.

Please note that you need to recall "cmake ." in all the directories. This can be done for instance with a script such as: (not fully tested)

 roscd
 find . -name "CMakeCache.txt" | while read line
 do 
     cd ${line/build\/CMakeCache.txt/}
     cmake .
     cd -
 done

Beware that a couple of binary must be compiled native and crossed (rospack, rosstack and rosmsg). To this end, compile them first native, save them (for instance renaming it rospack.intel), then compile them crossed, save the crossed compilation for later installation (for instance renaming it rospack.arm), then make a link to the correct executable for the current architecture, and mark these directory ROS_NOBUILD (touch ROS_NOBUILD). This also applies to libraries such as librospack.so and librosstack.so. I hope the WillowGarage team finds a way to decouple these libraries for cross-compilation.

It might also be necessary to delete all the .la files installed with the -dev package in ubuntu on the arm image. These files refers libtool to some libraries in /usr/include and /usr/lib, without using the -sysroot option. gcc/g++ sees the risk and does not accept to compile then. This is a problem in particular for libjpeg (compressed image transport).

Using all the above, I have ros working on both the gumstix overo and verdex. On the overo, using wifi G, the gumstix can downstream telemetry data and video data from an helicopter, using either raw images or jpeg-compressed images (not much framerate gain).

On the verdex, I need to change the timeout in rospy/client.py (TBC) to 20seconds as it is the time the systems needs to get roscore up and running (The disk access performance are extremely bad on this older board). If someone wants to run ROS on a verdex, please contact me, and I'll check exactly what I had to change to make it happen. Not that the file system mentioned above works for a verdex.

Check on http://support.skybotix.com/downloads.php for a full filesystem for the gumstix overo, with ros pre-compiled (Skybotix is a company selling micro-helicopter with an embedded gumstix, but the file system should be a good starting point for any gumstix application)


2022-05-28 12:37