[Documentation] [TitleIndex] [WordIndex

ICRA2010展示ブースにおけるPR2によるマニピュレーション・デモ用の中心的なレポジトリーです。

デモに関わるコードが、まだ、公開されていませんので、このページは、Willow Garage社内向けになっています。ここで紹介されるマニピュレーションをご利用されたい場合は、現状6月に予定されている正式なリリースをお待ちいただくことをおすすめいたします。

icra_manipulation_demo/overview.png

概要

このデモの根幹は、PR2を使って小物を掴んで置くという能力を試すことにあります。ロボットは、テーブルの一端から物体を掴み上げ、テーブルの違う端に物体を置きます。人間による干渉は、まったくなく、(すべてのことがうまくいけば)延々と自動的に、小物を認識して、掴むところを計算し、空いているところに小物をおくようにデザインされています。

このデモは、自律的にテーブル上の小物を移動させるという単純なアプリケーション自身にフォーカスするより、さまざまなロボット知能の統合(インテグレーション)に主眼が置かれています。

The two take-home system-level messages for the audience are:

Regarding the manipulation functionality itself, two main things that we'd like the audience to notice are that:

On this page we will discuss the functionality itself. More information for setting up and running the demo can be found in the list of tutorials:

  1. Install the model database server and data on a new robot or machine

    Describes how to install and start the PostgreSQL server on a robot. Does not show how to load the actual database onto this server.

  2. One-line key points to mention during the manipulation demo

    A simpler form of the main demo page which describes all the functionality in detail. Think of it as a "cheat-sheet" for remembering the main points that the audience might be interested in.

  3. Set up the source code tree for the ICRA manipulation demo

    Easy-to-follow instructions for downloading and building all the code you need for the manipulation demo on a robot.

  4. ICRA manipulation demo sync point hierarchy

    A list of the sync points used to pause the demo when using the demo joystick controller.

  5. Running the ICRA manipulation demo

    This tutorial explains how to run the ICRA manipulation demo.

把持のためのパイプライン

Chronologically, the process of grasping an object goes through the following stages:

Placing an object goes through very similar stages. In fact, grasping and placing are mirror images of each other, with the main difference that choosing a good grasp point is replaced by choosing a good location to place the object in the environment.

From a software hierarchy standpoint, the grasping pipeline contains the following:

The grasping pipeline relies heavily on other ROS packages and stacks, including:

The stages of the grasping operation are detailed in the next section.

把持モジュールの詳細

物体知覚

There are two main components of object perception:

Our pipeline always requires segmentation. If recognition is performed and is successful, this informs the grasp point selection mechanism. If not, we can still grasp the unknown object based only on perceived data.

Note that it is possible to avoid segmentation as well and select grasp points without knowing object boundaries. The current pipeline does not have this functionality, but it might gain it in the future.

To perform these tasks we rely on two main assumptions:

The sensor data that we use consists of a point cloud from the narrow stereo cameras. We perform the following steps:

The output from this components consists of the location of the table, the identified point clusters, and the corresponding database object id and fitting pose for those clusters found to be similar to database objects.

icra_manipulation_demo/detect_1.png

Narrow Stereo image of a table and three objects

icra_manipulation_demo/detect_2.png

Detection result: table plane has been detected (note the yellow contour). Objects have been segmented (note the different color point clouds superimposed on them). The bottle and the glass have also been recognized (as shown by the cyan mesh further superimposed on them)

把持するポイントの選択

For either a recognized object (with an attached database model id) or an unrecognized cluster, the goal of this component is to generate a list of good grasp points. Here the object to be grasped is considered in isolation: a good grasp point refers strictly to a position of the gripper relative to the object, and knows nothing about the rest of the environment.

For unknown objects, we use a module that operates strictly on the perceived point cluster. Details on this module can be found in the following paper: Contact-Reactive Grasping of Objects with Partial Shape Information that Willow researchers will present at the ICRA Workshop on Mobile Manipulation on Friday 05/07.

For recognized objects, out model database also contains a large number of pre-computed grasp points. These grasp points have been pre-computed using GraspIt!, an open-source simulator for robotic grasping.

The output from this module consists of a list of grasp points, ordered by desirability (it is recommended that downstream modules in charge of grasp execution try the grasps in the order in which they are presented).

環境認識と障害物マップのプロセシング

We have mentioned that the point cloud from the narrow stereo camera is used for object detection. However, the narrow stereo camera provides a very focused view of the environment, good for the target of the grasping task but which might miss other parts of the environment that the robot can collide against. Furthermore, both stereo camera occasionally produce "false positives", meaning spurious points that might make the robot believe obstacles are in its workspace. While we are working on fixing such issues, we are currently using the tilting laser to provide a complete view of the environment for collision planning.

At specified points in the grasping task, a complete sweep is performed with the tilting laser in order to build the Collision Map of the environment. This map is then used for motion planning, grasp feasibility checks, etc. The main implication is that any changes to the environment that happen between map acquisitions are missed by the robot (with the exception of those changes that the robot effects himself, such as moving an object around).

The robot will avoid fixed parts of the environment (such as the table, the monitor stand, etc) as well as the objects that are part of the manipulation demo, but will have problems with very dynamic obstacles, such as people. It is recommended for people (both demonstrators and audience) to avoid interfering with the robot's workspace. We are aware that this is a key limitation of the current system and will be working hard to remove it in the future.

In addition to the Collision Map acquired with the tilting laser, the robot populates the world with Collision Models of the target objects as well as the detected table. These are added to the Collision Map as either exact triangular meshes (in the case of recognized objects) or bounding boxes (for unknown clusters). These are used to replace the corresponding points from the tilting laser. This procedure allows the robot to reason a lot more precisely about the parts of the world that is has more information on.

When the robot is holding an object, the Collision Model for that object is attached to the robot's gripper. As a result, the robot will reason about arm movement such that the grasped object does not collide with something else in the environment.

Note that the Collision Map processing is part of the arm navigation stack, which is already released.

icra_manipulation_demo/coll_map1.png

Image of the Collision Map. Note the points from the tilting laser (in cyan) and the explicitly recognized objects (in green)

icra_manipulation_demo/coll_map2.png

Detail of the Collision Map. Note that the recognized objects have been added as triangle meshes, while the unrecognized object has been added as a bounding box.

Motion Planning

Motion planning is also done using the arm_navigation stack. The algorithm that we use is an RRT variant.

The motion planner reasons about collision in a binary fashion - that is, a state that does not bring the robot in collision with the environment is considered feasible, regardless of how close the robot is to the obstacles. As a result, the planner might compute paths that bring the arm very close to the obstacles. To avoid collisions due to sensor errors or miscalibration, we pad the robot model used for collision detection by a given amount (normally 2cm).

Grasp Execution

The motion planner only works in collision-free robot states. Grasping, by nature, means that the gripper must get very close to the object, and that immediately after grasping, the object, now attached to the gripper, is very close to the table. Since we can not use the motion planner for these states, we introduce the notion of a pre-grasp position: a pre-grasp is very close to the final grasp position, but far enough from the object that the motion planner will compute a path to it. The same happens after pickup: we use a lift position which is far enough above the table that the motion planner can be used from there.

To plan motion from pre-grasp to grasp and from grasp to lift we use an interpolated IK motion planner, while also doing more involved reasoning about which collisions must be avoided and which collisions are OK. For example, during the lift operation (which is guaranteed to be in the "up" direction), we can ignore collisions between the object and the table.

The motion of the arm for executing a grasp is:

      starting_arm_position
               |
               | <-(motion planner)
               |
              \ /
               '
        pre-grasp position
               |
               | <-(interpolated IK)
               |   (with tactile sensor reactive grasping)
              \ /
               '
         grasp position
      (fingers are closed)
(object model is attached to gripper)
               |
               | <-(interpolated IK)
               |
              \ /
               '
         lift position
               |
               | <-(motion planner)
               |
              \ /
               '
    some desired arm position 

icra_manipulation_demo/grasp1.png

Interpolated IK path from pre-grasp to grasp planned for a grasp point of an unknown object

icra_manipulation_demo/grasp2.png

A path to get the arm to the pre-grasp position has been planned using the motion planner and executed.

icra_manipulation_demo/grasp3.png

The interpolated IK path from pre-grasp to grasp has been executed.

icra_manipulation_demo/grasp4.png

The object has been lifted. Note that the object Collision Model has been attached to the gripper.

Reactive Grasping Using Tactile Sensing

There are many possible sources of error in the pipeline, including errors in object recognition or segmentation, grasp point selection, miscalibration, etc. A common result of these errors will be that a grasp that is thought to be feasible will actually fail, either by missing the object altogether or by hitting the object in an unexpected way and displacing it before the fingers are closed.

We can correct for some of these errors by using the tactile sensors in the fingertips. We use a grasp execution module that slots in during the move from pre-grasp to grasp and uses a set of heuristics to correct for errors detected by the tactile sensors. Details on this module can be found in the following paper: Contact-Reactive Grasping of Objects with Partial Shape Information that Willow researchers will present at the ICRA Workshop on Mobile Manipulation on Friday 05/07.


2022-05-28 12:40