Note: Please be aware that the Pilz command planner has moved to MoveIt and http://wiki.ros.org/pilz_robots and http://wiki.ros.org/pilz_industrial_motion are unmaintained. These tutorials are outdated and might or might not work dependent on the ROS distro.
These tutorials are outdated and might or might not work dependent on the ROS distro.
Simple Pick-and-place application
- Model your application with the Pilz Manipulator Module PRBT
Model your first application including an object from a stl file and a table, on which the Manipulator Module PRBT is mounted and move the robot in this virtual environment.
- Move your robot with the pilz_command_planner
Setup your ROS with the pilz_industrial_motion packages and learn how to plan and move your robot along a path with the pilz_command_planner.
- Program your robot with the Python API
Develop a pick and place application and learn how to teach positions. You create a script which runs with the Python API and use the PTP and LIN commands.
- Pick and Place application with the Pilz Manipulator Module PRBT and the Python API
Implement a pick and place application and learn to program a simple application with the Python API.
Quickstart guide for real PRBT
- How to set up CAN connection to Pilz Manipulator Module
Learn how to set up the Pilz Manipulator Module PRBT and move the robot for the first time.
Note: If you experience any problems or have suggestions to improve the tutorials, please file an Issue on Github.