[Documentation] [TitleIndex] [WordIndex

  Show EOL distros: 

pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model | pr2_mechanism_msgs | realtime_tools

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model | pr2_mechanism_msgs | realtime_tools

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

  • Maintainer status: maintained
  • Maintainer: Austin Hendrix <ahendrix AT willowgarage DOT com>
  • Author: Eric Berger berger@willowgarage.com
  • License: BSD
  • Source: git https://github.com/PR2/pr2_mechanism.git (branch: hydro-devel)
pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

  • Maintainer status: maintained
  • Maintainer: Devon Ash <dash AT clearpathrobotics DOT com>
  • Author: Eric Berger berger@willowgarage.com
  • License: BSD
  • Source: git https://github.com/pr2/pr2_mechanism.git (branch: indigo-devel)

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

  • Maintainer status: maintained
  • Maintainer: Devon Ash <dash AT clearpathrobotics DOT com>
  • Author: Eric Berger berger@willowgarage.com
  • License: BSD
pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

  • Maintainer status: unmaintained
  • Maintainer: ROS Orphaned Package Maintainers <ros-orphaned-packages AT googlegroups DOT com>
  • Author: Eric Berger berger@willowgarage.com
  • License: BSD
  • Source: git https://github.com/pr2/pr2_mechanism.git (branch: kinetic-devel)
pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

  • Maintainer status: unmaintained
  • Maintainer: ROS Orphaned Package Maintainers <ros-orphaned-packages AT googlegroups DOT com>
  • Author: Eric Berger berger@willowgarage.com
  • License: BSD
  • Source: git https://github.com/pr2/pr2_mechanism.git (branch: kinetic-devel)
pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

  • Maintainer status: unmaintained
  • Maintainer: ROS Orphaned Package Maintainers <ros-orphaned-packages AT googlegroups DOT com>
  • Author: Eric Berger berger@willowgarage.com
  • License: BSD
  • Source: git https://github.com/pr2/pr2_mechanism.git (branch: melodic-devel)
pr2_mechanism: pr2_controller_interface | pr2_controller_manager | pr2_hardware_interface | pr2_mechanism_diagnostics | pr2_mechanism_model

Package Summary

This package contains the C++ interfaces to the PR2 hardware components that are controlled over EtherCAT. This includes the motors and encoders needed to control the PR2 mechanism, as well as components like the pressure sensors in the fingertips, camera triggers, etc... All of the hardware components in this interface are directly available to the controllers inside the hard realtime control loop.

  • Maintainer status: maintained
  • Maintainer: ROS Orphaned Package Maintainers <ros-orphaned-packages AT googlegroups DOT com>
  • Author: Eric Berger berger@willowgarage.com
  • License: BSD
  • Source: git https://github.com/pr2/pr2_mechanism.git (branch: melodic-devel)

Hardware components

The PR2 hardware interface provides a C++ abstraction layer for the PR2 hardware that is controlled over the etherCAT link that runs through the robot. Most users should not have to deal directly with this interface. If you are only interested in controlling the robot joints, you should directly interact with pr2_mechanism_model. Only very advanced users that need direct access to the hardware should be using the PR2 hardware interface.


2022-05-28 12:52