You're reading the documentation for an older, but still supported, version of ROS 2. For information on the latest version, please have a look at Humble.

Using URDF with robot_state_publisher

Goal: Simulate a walking robot modeled in URDF and view it in Rviz.

Tutorial level: Intermediate

Time: 15 minutes

Contents

Background
Prerequisites
Tasks
Summary

Background 

This tutorial will show you how to model a walking robot, publish the state as a tf2 message and view the simulation in Rviz. First, we create the URDF model describing the robot assembly. Next we write a node which simulates the motion and publishes the JointState and transforms. We then use robot_state_publisher to publish the entire robot state to /tf2.

Prerequisites 

rviz2

As always, don’t forget to source ROS 2 in every new terminal you open.

Tasks 

1 Create a package 

mkdir -p ~/dev_ws/src  # change as needed
cd ~/dev_ws/src
ros2 pkg create urdf_tutorial_r2d2 --build-type ament_python --dependencies rclpy
cd urdf_tutorial_r2d2

You should now see a urdf_tutorial_r2d2 folder. Next you will make several changes to it.

2 Create the URDF File 

Create the directory where we will store some assets:

mkdir -p urdf

Download the URDF file and save it as ~/dev_ws/src/urdf_tutorial_r2d2/urdf/r2d2.urdf.xml. Download the Rviz configuration file and save it as ~/dev_ws/src/urdf_tutorial_r2d2/urdf/r2d2.rviz.

3 Publish the state 

Now we need a method for specifying what state the robot is in. To do this, we must specify all three joints and the overall odometry.

Fire up your favorite editor and paste the following code into ~/dev_ws/src/urdf_tutorial_r2d2/urdf_tutorial_r2d2/state_publisher.py

from math import sin, cos, pi
import rclpy
from rclpy.node import Node
from rclpy.qos import QoSProfile
from geometry_msgs.msg import Quaternion
from sensor_msgs.msg import JointState
from tf2_ros import TransformBroadcaster, TransformStamped

class StatePublisher(Node):

    def __init__(self):
        rclpy.init()
        super().__init__('state_publisher')

        qos_profile = QoSProfile(depth=10)
        self.joint_pub = self.create_publisher(JointState, 'joint_states', qos_profile)
        self.broadcaster = TransformBroadcaster(self, qos=qos_profile)
        self.nodeName = self.get_name()
        self.get_logger().info("{0} started".format(self.nodeName))

        degree = pi / 180.0
        loop_rate = self.create_rate(30)

        # robot state
        tilt = 0.
        tinc = degree
        swivel = 0.
        angle = 0.
        height = 0.
        hinc = 0.005

        # message declarations
        odom_trans = TransformStamped()
        odom_trans.header.frame_id = 'odom'
        odom_trans.child_frame_id = 'axis'
        joint_state = JointState()

        try:
            while rclpy.ok():
                rclpy.spin_once(self)

                # update joint_state
                now = self.get_clock().now()
                joint_state.header.stamp = now.to_msg()
                joint_state.name = ['swivel', 'tilt', 'periscope']
                joint_state.position = [swivel, tilt, height]

                # update transform
                # (moving in a circle with radius=2)
                odom_trans.header.stamp = now.to_msg()
                odom_trans.transform.translation.x = cos(angle)*2
                odom_trans.transform.translation.y = sin(angle)*2
                odom_trans.transform.translation.z = 0.7
                odom_trans.transform.rotation = \
                    euler_to_quaternion(0, 0, angle + pi/2) # roll,pitch,yaw

                # send the joint state and transform
                self.joint_pub.publish(joint_state)
                self.broadcaster.sendTransform(odom_trans)

                # Create new robot state
                tilt += tinc
                if tilt < -0.5 or tilt > 0.0:
                    tinc *= -1
                height += hinc
                if height > 0.2 or height < 0.0:
                    hinc *= -1
                swivel += degree
                angle += degree/4

                # This will adjust as needed per iteration
                loop_rate.sleep()

        except KeyboardInterrupt:
            pass

def euler_to_quaternion(roll, pitch, yaw):
    qx = sin(roll/2) * cos(pitch/2) * cos(yaw/2) - cos(roll/2) * sin(pitch/2) * sin(yaw/2)
    qy = cos(roll/2) * sin(pitch/2) * cos(yaw/2) + sin(roll/2) * cos(pitch/2) * sin(yaw/2)
    qz = cos(roll/2) * cos(pitch/2) * sin(yaw/2) - sin(roll/2) * sin(pitch/2) * cos(yaw/2)
    qw = cos(roll/2) * cos(pitch/2) * cos(yaw/2) + sin(roll/2) * sin(pitch/2) * sin(yaw/2)
    return Quaternion(x=qx, y=qy, z=qz, w=qw)

def main():
    node = StatePublisher()

if __name__ == '__main__':
    main()

4 Create a launch file 

Create a new ~/dev_ws/src/urdf_tutorial_r2d2/launch folder. Open your editor and paste the following code, saving it as ~/dev_ws/src/urdf_tutorial_r2d2/launch/demo.launch.py

import os
from ament_index_python.packages import get_package_share_directory
from launch import LaunchDescription
from launch.actions import DeclareLaunchArgument
from launch.substitutions import LaunchConfiguration
from launch_ros.actions import Node

def generate_launch_description():

    use_sim_time = LaunchConfiguration('use_sim_time', default='false')

    urdf_file_name = 'r2d2.urdf.xml'
    urdf = os.path.join(
        get_package_share_directory('urdf_tutorial_r2d2'),
        urdf_file_name)
    with open(urdf, 'r') as infp:
        robot_desc = infp.read()

    return LaunchDescription([
        DeclareLaunchArgument(
            'use_sim_time',
            default_value='false',
            description='Use simulation (Gazebo) clock if true'),
        Node(
            package='robot_state_publisher',
            executable='robot_state_publisher',
            name='robot_state_publisher',
            output='screen',
            parameters=[{'use_sim_time': use_sim_time, 'robot_description': robot_desc}],
            arguments=[urdf]),
        Node(
            package='urdf_tutorial_r2d2',
            executable='state_publisher',
            name='state_publisher',
            output='screen'),
    ])

5 Edit the setup.py file 

You must tell the colcon build tool how to install your Python package. Edit the ~/dev_ws/src/urdf_tutorial_r2d2/setup.py file as follows:

include these import statements

import os
from glob import glob
from setuptools import setup
from setuptools import find_packages

append these 2 lines inside data_files

data_files=[
  ...
  (os.path.join('share', package_name), glob('launch/*.py')),
  (os.path.join('share', package_name), glob('urdf/*'))
],

modify the entry_points table so you can later run ‘state_publisher’ from a console

'console_scripts': [
    'state_publisher = urdf_tutorial_r2d2.state_publisher:main'
],

Save the setup.py file with your changes.

6 Install the package 

cd ~/dev_ws
colcon build --symlink-install --packages-select urdf_tutorial_r2d2
source install/setup.bash

7 View the results 

Launch the package

ros2 launch urdf_tutorial_r2d2 demo.launch.py

Open a new terminal, the run Rviz using

rviz2 -d ~/dev_ws/install/urdf_tutorial_r2d2/share/urdf_tutorial_r2d2/r2d2.rviz

See the User Guide for details on how to use Rviz.

Summary 

You created a JointState publisher node and coupled it with robot_state_publisher to simulate a walking robot. The code used in these examples can be found here.

Credit is given to the authors of this ROS 1 tutorial from which some content was reused.