[Documentation] [TitleIndex] [WordIndex

Only released in EOL distros:  

pr2_navigation_apps: pr2_2dnav | pr2_2dnav_local | pr2_2dnav_slam

Package Summary

This application allows the PR2 to navigate autonomously in an odometric frame.

pr2_navigation_apps: pr2_2dnav | pr2_2dnav_local | pr2_2dnav_slam

Package Summary

This application allows the PR2 to navigate autonomously in an odometric frame.

pr2_navigation_apps: pr2_2dnav | pr2_2dnav_local | pr2_2dnav_slam

Package Summary

This application allows the PR2 to navigate autonomously in an odometric frame.

pr2_navigation_apps: pr2_2dnav | pr2_2dnav_local | pr2_2dnav_slam

Package Summary

This application allows the PR2 to navigate autonomously in an odometric frame.

Package Summary

This application allows the PR2 to navigate autonomously in an odometric frame.

Package Summary

This application allows the PR2 to navigate autonomously in an odometric frame.

Package Summary

This application allows the PR2 to navigate autonomously in an odometric frame.

Overview

This package provides an application that allows a PR2 robot to navigate autonomously in an odometric frame without any pre-specified map.

Prerequisites

The pr2_2dnav_local application requires some prerequisite steps in order to run.

Bring up the Robot

As with all PR2 applications, you must bring up your robot.

Tuck the Arms

Tuck the arms of the PR2 using the pr2_tuckarm application.

Running the Application

The pr2_2dnav_local application can be run with the following command:

roslaunch pr2_2dnav_local pr2_2dnav.launch

Interacting with the Application

The navigation stack that is the heart of the pr2_2dnav_local application can be commanded via rviz, nav_view, or through code.

rviz

Through Code


2022-05-28 12:51